Everyone knows that everything needs maintenance, and the display rack is no exception. We often clean and maintain the display racks to keep them shiny. However, you may not know that some wrong cleaning and maintenance methods, although temporarily making the display rack clean, actually cause potential damage to the display rack, and your display rack will have irreparable problems, but it is counterproductive. . Here are some of the problems that are easy to occur in the maintenance of the display rack and how to avoid it. I hope to help the consumers.
The rag must be clean
When cleaning and maintaining the display rack, be sure to make sure the rag is clean. After cleaning or wiping off the dust, be sure to turn over or replace it with a clean cloth. Don't be lazy and repeatedly use the dirty side, which will only cause the dirt to repeatedly rub on the surface of the commercial furniture, but will damage the bright surface of the display.
Care agent selection
In order to maintain the original brightness of the display rack, there are currently two types of display rack care products, such as display rack care spray wax and cleaning and maintenance agent. The former is mainly used for display frames of various wood, polyester, paint, fireproof rubber sheets, etc., and has two different fresh fragrances of jasmine and lemon. The latter is suitable for all kinds of solid wood display racks such as wood, glass, synthetic wood or melamine board, especially suitable for display rack of mixed materials. Therefore, if you can use skin care products that have both cleansing and care effects, you can save a lot of valuable time.
Before using the wax and cleaning and maintenance agent, it is best to shake it first, then hold the spray can directly at a 45 degree angle, so that the liquid component in the tank can be completely released without losing pressure. Then gently spray a dry rag at a distance of about 15 cm, so that you can wipe the commercial furniture, it will have a good cleaning and maintenance effect. In addition, after using the rag, remember to wash and dry. For display racks with fabric materials, such as fabric sofas and leisure cushions, you can use the cleaning and cleaning agent for cleaning carpets. When using, first use a vacuum cleaner to remove dust, then spray a small amount of carpet cleaner on a damp cloth.
Paint surface watermark removal
There is often an annoying watermark on the lacquered table that has been placed on the wet teacup. How can I quickly remove them? You can put a clean damp cloth on the watermark on the desktop and then iron it on the iron at a lower temperature. This will evaporate the moisture that penetrates the paint film and make the watermark disappear. However, when using this method, the rag used should not be too thin, and the temperature of the iron cannot be adjusted too high. Otherwise, the watermark on the desktop disappears, but the branding can no longer be removed.
Maintenance of iron display rack
The iron display rack has the characteristics of durability and durability. In general, everyday wear can make it more quaint, but this is not to say that the iron display rack is maintenance-free. Due to the particularity of its materials and processes, the iron display rack has a special place for its maintenance and maintenance:
1. Outdoor iron display rack
The outdoor iron display rack requires rust prevention, wear resistance, corrosion resistance and anti-exposure in the selection of materials. Generally speaking, manufacturers have taken into account the characteristics of the outdoor environment during the production process, so users only need to identify well-known manufacturers when purchasing, and don't want to buy some unqualified products. But the following points must be done:
1) Dust removal
There is a lot of dust in the outdoor, and the time is long. There is a layer of dust on the surface of the display rack. It will affect the effect of the display rack. If it takes a long time, it will cause damage to the protective film on the display rack. Therefore, the outdoor iron display rack should be wiped regularly, generally with a soft cotton cloth.
2. Moisture proof.
In the foggy weather, use a dry cotton cloth to wipe off the water drops on the display rack; on rainy days, the water drops should be dried in time after the rain stops.
2. Indoor iron display rack
1) Avoid bumps
This is the first thing to notice after purchasing the iron display rack. The display rack should be handled with care during handling; the place where the display rack is placed should be a place that hard objects do not touch frequently; once selected, it should not be frequent. The ground on which the display rack is placed should also be kept flat to make the four legs of the display rack stable. If the shaking is unstable, the display frame will be slightly deformed for a long time, which will affect the service life of the display rack.
2) Clean dust removal
It is best to use cotton knitwear as a rag to wipe the surface of the display. Pay attention to the dust in the depressions and embossing on the display rack.
3) Keep away from acid and alkali
Acid and alkali, which have a corrosive effect on iron, are the "number one killer" of iron display racks. If you accidentally get acid (such as sulfuric acid, vinegar) or alkali (such as alkali, soapy water, soda) on the iron display rack, immediately flush the stain with clean water and dry it with a dry cotton cloth.
4) Stay away from the sun.
The position of the display rack is best to avoid direct sunlight from the window. When the iron display rack is exposed to the sun for a long time, the paint color will be discolored; the colored paint layer will be cracked and peeled off, and the metal will be oxidized and deteriorated. If you encounter strong sunlight and cannot move the rack, you can use curtains or blinds to block it.
5) Isolate the moisture.
The humidity in the room should be maintained within the normal value. The display rack should be kept away from the humidifier, the moisture will cause corrosion of the metal, and the chrome plating will release the film. When the display rack is clean, do not use boiling water to clean the display rack. Wipe it with a damp cloth, but do not rinse it with running water.
6) Eliminate rust.
If the display rack is rusted, do not make your own use of sandpaper. If the rust is small and shallow, it can be applied to the rust with cotton gauze oil. After a while, use a cloth to wipe off the rust. If the rust has been enlarged and become heavy, the technician should be asked to repair it.
In short, as long as you have mastered the common sense of maintenance, pay attention to the protection of iron display racks in daily life, you can extend its life, so that your carefully selected wrought iron products will accompany you for a long time.
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.