With over 22 years of experience in customizing a wide range of stainless steel products including electrical boxes, electronics housings, server racks and other metal enclosures, mechanical parts, doors window and table chair frame, and other stainless steel products.

YISHANG are committed to manufacture and customize all kinds of network rack and cabinets, server rack and cabinets, electronics enclosure, electrical box and other metal enclosures.

1) Material: metal + wood. 2) Size: W130*D40*H180 cm, or custom. 3) Usage: clothes, shoes, handbag display.

YISHANG offers you a wide range of in-house manufacturing process and production facilities for metal parts. Depending on product characteristics, nature of material , material , geometry and quantities, we can choose the suitable technique for your products.

The cutting surface is smooth and beautiful, the surface roughness is only a few tens of microns, and even laser cutting can be used as the last process. No machining is required, and the parts can be used directly. After the laser is cut by the laser, the width of the heat-affected zone is small, the performance of the material near the slit is almost unaffected, and the deformation of the workpiece is small, the cutting precision is high, the geometry of the slit is good, and the shape of the slit cross-section is relatively regular. rectangle. There is no contact between the torch and the workpiece during laser cutting, and there is no wear of the tool. To machine parts of different shapes, there is no need to change the "tool", just change the output parameters of the laser. The laser cutting process has low noise, low vibration and no pollution.

1) Material: metal. 2) Size: W560xD300 xH1700mm or custom. 3) Application: cosmetics, perfume, etc.

Five Advantages of Laser Cutting: 1. High precision: positioning accuracy 0.05mm, repeat positioning accuracy 0.02mm. 2. The cutting surface is smooth: the cutting surface is free of burrs, the surface roughness of the cutting is generally controlled in Ral2.5. 3. Fast speed: cutting speed can reach 10m / minute, the maximum positioning speed can reach 70m / m / n, much faster than the line cutting speed. 4. Good cutting quality: no contact cutting, the edge is affected by heat is very small, there is basically no thermal deformation of the workpiece, completely avoiding the collapse formed when the material is punched and sheared, the slit generally does not require secondary processing. 5. Saving mold investment: laser processing does not need mold, no mold consumption, no need to repair the mold, saving time to replace the mold, thereby saving processing costs, reducing production costs, especially suitable for processing large products.