Custom Metal and Acrylic Rotating Display Racks for Retail Stores
1. Normal dimensions: 350*350*1500mm, 400*400*1600mm, 450*450*1700mm (adopted by our company),
2. Customizable dimensions: height not exceeding 1900mm is recommended.
1. Iron plate: 0.8mm - 1.0mm thick can be selected.
2. Iron round pipe: 35mm - 40mm diameter for inner pipe and 40mm - 45mm diameter for outer pipe.
3. Transparent acrylic: 1.0mm - 3.0mm thick can be selected.
1. Powder coating: usually white, other colors can be selected from Pantone color card or RAL color card.
2. Wood grain: dark wood grain or light wood grain, common wood grain as shown in the follow pictures.
|This rotating display rack will be assembly structure. There are two reasons:|
1. Disassembly can not save the packaging volume: it is rectangular design, the acrylic boxes can not fold or overlap.
2. The installation time of disassembly is long: it is mainly installed with screws, and it takes 30 minutes for two
people to install.
You can order our standard sample or customize a sample.
1. Free 3D sketch.
2. We can customize according to your requirements.
1. Shape: our company adopts rectangular cube. Rounded cubes can also be used, but the cost is a little higher than that of rectangular cubes.
2. Cover plate: our company does not use the cover plate to seal the top so that the top can be used to place things. Also can use cover board to seal coping, prevent dirt.
3. Advertisement: there are 4 ways (it can be mixed and matched on the top four sides according to actual needs).
1) Screen printing: it can only print simple fonts and patterns, which are easy to fade after a long time.
2) UV printing: logo has three-dimensional effect, can print more complex fonts and patterns, and is not easy to fade.
3) Mount picture: the content of the picture can be freely selected, with strong flexibility.
4) Replaceable advertising: a transparent PVC or transparent acrylic cover can be pasted to replace the advertising cardboard.
1. Application: each layer of acrylic box can display the same type of goods, and also different types of goods.
2. Acrylic thickness:
1) 1.0mm: low bearing capacity, not recommended.
2) 2.0mm: suitable for light goods, such as chips and snacks
2) 3.0mm: good bearing capacity, able to display heavier commodities such as red wine.
3) above 3.0mm: although the bearing capacity is good, the appearance is bulky and the cost is relatively high.
1) Transparent colorless: high-grade atmosphere, clear inner vision, recommended choice.
2) Transparent color: creative, can choose according to actual needs.
3) Translucent color: the inner vision is not clear, it is not recommended to choose.
4) Opaque color: cannot see inside, do not recommend to choose.
5. Fixed mode:
1) Screw fixation: screws are used to fix the acrylic onto the metal support plate, which is relatively stable.After removing the screws, the acrylic box can be replaced (our company adopts).
2) Glue fixation: use glue to fix, glue bonding traces will be seen, can not easily replace the acrylic box.
Each layer is equipped with pressure rolling bearing, so each layer can rotate independently. High quality bearings, no noise during rotation, and smooth rotation. Rolling bearing easy to use and maintain, reliable work. The rolling bearing has low friction coefficient, good starting performance and high bearing capacity at medium speed, so it is recommended for use by our company.
The bottom is also a cube, but the rounded corner design is used to prevent children from being hurt in falls.You can also use right angles to reduce costs.
It can be used as a small storage cabinet or as an advertisement.
3. Cabinet door:
1) Hinged door: if the items in the cabinet are relatively expensive. For safety, it is recommended to use the hinged door with lock. Type of lock: mailbox lock, bounce lock, rolling lock and hand-pulling lock. Mailbox lock is recommended for routine use (same as picture).
2) Magnetic door: the magnetic door is not suitable for locking, but it is easy to open and beautiful.
4. Advertising methods:
Silk printing, UV printing, mount picture and replaceable advertising cardboard. (Same as the top)
5. Mobile mode:
1) Castor: it is easy to move and can choose non-brake castor or brake castor. Our company adopts brake castor. (Left picture is non-brake castor and right picture is brake castor.)
2) Adjusting foot: to prevent uneven ground.
1. Worry about the customization strength: you can browse our website www.ys-display.com
2. Business team communication skills:
1) Direct communication by email and phone, complete design and quotation within 4 - 8 hours.
2) Direct face-to-face communication (business personnel, technical personnel, costing personnel), 1 - 2 hours to complete the design quotation.
1. Pictures, drawings, size and weight of the products.
2. Target price and application scenarios.
3. Free 3D rough draft (left picture) and design sketch (right picture).
Thickness: 0.01mm-0.15mm (commonly used 0.03mm-0.05mm for display rack packaging plastic bags).
Conventional thickness of 30mm, or according to the need to choose 10mm, 20mm or more than 30mm, the recommended thickness is not more than 50mm.
Number of carton layers: there are 3, 5 and 7 layers in general. It is recommended to use 5 layers for general export products and 7 layers for large and heavy products.
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.