Custom Large Metal Light Box Enclosure

With 23 years of experience in sheet metal manufacturing, YISHANG focuses on custom sheet metal parts and sheet metal enclosures for customers from all over the world. Now let's introduce a sheet metal enclosure - LED metal light box.

1. The main components of the metal light box

1) Panel: 1mm thick cold rolled steel

2) Frame: 2mm thick cold rolled steel

3) Feet: 1.5mm thick iron square tube

4) LED light: 15W light tube

2. The production process

1) Cutting

The laser cutting machine with extremely high precision is used for cutting, and the dimensional tolerance is only 0.1mm-0.2mm. More than 5 years experience The operator controls the machine. After cutting, check whether the product size conforms to the drawing and whether there are burrs on the edge.

2) Bending

Use CNC hydraulic bending machine to bend, product size tolerance within 0.2mm, angle tolerance within 0.5mm. More than 10 years of experience The operator controls the machine. After bending, use the electronic ruler and the angle ruler to check whether the size and angle meet the drawing.

3) Welding

The spot welding method is mainly used to splicing the workpieces, and the welding points are required to be thick and strong, the surface is not shadowed, and the surface is not biased. More than 7 years of experience with the master, the dimensions are measured after welding to ensure that the weld is in place.

4) Polishing

Using a variety of grinding processes, it is required that the surface of the product after polishing is smooth enough, no shadow, no holes, no gaps, no seams, straight edges are straight, no holes, no gaps are not wider than 20mm. More than 5 years of experience with the master, to ensure the quality of polishing.

5) Installation test

In order to ensure that the produced workpieces conform to the drawings and the construction is precise, the technicians on the top of the powder spray will install and test the products. After confirming that the installation is ok, take each workpiece to dust.

6) Powder coating

Use a new powder to coat, requiring color, luminosity, and texture to correspond to the customer's already confirmed color card, the workpiece is not damaged and dropped, the surface is not exposed, no black spots, no powder, no orange peel, no fingerprints. More than 6 years of experience, the master is operating to ensure the quality of the powder.

7) Posting

Each panel is laser-cut with the corresponding advertising word content. A 1mm thick white acrylic plate is placed on the back of the panel to ensure that the acrylic sheet can cover the internal structure and ensure light transmission.

8) Installation

After dusting, it may cause a slight change in the size of the product. In order to make the installation smooth after the customer receives the goods, YISHANG will install all the workpieces again to ensure the installation is normal.

If you are worried about finding a suitable sheet metal manufacturing supplier, then YISHANG will be a good partner, welcome to consult!