Custom Garment Display Stand, Clothing Shop Fixture, Boutique Display
1. Standard size: length 72.5 x width 36 x height 190 cm.
2. Customized size: length 65 x width 32 x height 180 cm or length 60 x width 30 x height 170cm, or
customized as required.
1. Round iron pipe: we adopt 1mm pipe wall thickness, which can be chosen from 0.8mm to 1.2mm.
2.MDF board: we adopt 20mm thickness, which can be selected from 10mm to 25mm.
3. Glass: we adopt 12mm thickness, which can be selected from 8mm to 12mm.
1. Tube powder coating: conventional gray, black or white, you can choose the color from pantone.
2. MDF board: 1) Conventional wood grain, wood grain can choose light or dark color. 2) Paint can be
selected for special colors, including varnish, hammer paint, orange paint, corrugated paint, flash paint,
high gloss paint, flat paint, matte paint and wood wax.
1. There is a big difference between the round tube and the wooden frame. The whole structure packaging
can easily bend the circular tube bracket and make it difficult to fix it in the package.
2. The installation of the whole garment display stand only needs 8 screws, which is easy to install. One person
only needs 5-10 minutes to complete the installation.
3. Small packaging volume, saving packaging and transportation costs.
You can order our standard sample or customize a sample.
1. Free 3D sketch.
2. We can customize according to your requirements.
1. Diameter of round pipe: our company adopts 12mm diameter, which can be selected from 10mm-15mm according to the weight of goods.
2. Round pipe on the top
1) For the sake of beauty and safety, each corner of the pipe is not a sharp right angle, but a rounded corner with a radian of 30. Rounded corner radians can be selected between 25 and 45.
2) The two diverging round pipes are fastened and connected to the y-bracket with M3 cross screw. Screws cannot be hidden, so it is not recommended to use screws larger than M3. The bigger the screw cap, the lower the aesthetics.
3) Clothes or trousers can be displayed directly on the pipe. Remove the screw from the pipe, and lock the screw after the pipe passes through the clothes, so that the clothes can be more intuitive and better displayed.
1) The round pipe is made of welding technology
1) The "inverted Y" support feet at the bottom have an opening width of 36cm, which can be selected from 30cm to 40cm. It is recommended that the width of the supporting feet should be the same as the width of the wooden frame to ensure the stability of the clothing shop fixture.
1. Applicable wood
1) MDF: can be pasted with dark or light wood grain, and can also be painted. The cost is lowest, so we use.
2) Solid wood: it can be sprayed with varnish or other special colors as required, with the highest cost.
3) Plywood: it can be pasted with dark or light wood grain and painted, the cost is moderation.
2. Wood frame size
1) Standard size: length 72.5 x width 36 x height 50 cm.
2) Other sizes: can be customized according to actual needs. In order to maintain the elegant appearance of the botique display stand, it is recommended not to exceed 80cm in length, 50cm in width and 60cm in height.
3. Fixed mode
1) On the y-type bracket, the iron plate with holes is welded. After locking the screws, the wooden frame can be fixed, and the screws are hidden under the wood board to maintain a beautiful appearance.
2) Universal glue can also be used to paste the wooden frame onto the Y bracket, but it cannot be removed, which is not flexible enough.
4. Function of wood frame
1) Store pants, shirts, or t-shirts.
2) Display plants, magazines and other items to decorate the store.
1. Applicable glass types
1) Plain glass
2) Tempered glass (used by our company)
3) Embossed glass
4) Wired glass
5) Insulating glass
2. Fixed mode
1) Slot mode: plane a slot on the inside of both sides of the wooden frame, the width of the slot should be 0.5mm - 1.0mm larger than the glass thickness, and the depth of the slot should be between 3mm - 5mm, making the glass not only can be easily inserted into the slot, but also can be firmly fixed in the slot, convenient to use.
2) Metal plate support + glass glue: use screws to lock the metal plate to the inside of both sides of the wooden frame, and use glass glue to bond the glass layer shelf after placing the plate to ensure the firm glass layer shelf, but the glass layer shelf cannot be removed, which is inconvenient to use.
1. Packaging method: each part of the display rack is packed into a thick plastic bag or bubble bag, surrounded by 30mm thick foam, and exported to 5-layer carton with paper corner protection.
2. Packaging test: the first package must be crash-tested. After the test, open the package to check whether the product is damaged or deviated from the position.
1. Pictures, drawings, size and weight of the products.
2. Target price and application scenarios.
3. Free 3D rough draft (left picture) and design sketch (right picture).
Thickness: 0.01mm-0.15mm (commonly used 0.03mm-0.05mm for display rack packaging plastic bags).
Conventional thickness of 30mm, or according to the need to choose 10mm, 20mm or more than 30mm, the recommended thickness is not more than 50mm.
Number of carton layers: there are 3, 5 and 7 layers in general. It is recommended to use 5 layers for general export products and 7 layers for large and heavy products.
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.