Custom Dual Cool Metal Holder Headphone Display Stand
1. Standard size: W1200 X D285 X H305 mm, can display 4 headphones.
2. Customized size: if display 2 headphones, size W800 X D285 X H305 mm is recommended. If more
headphones are displayed, the size will be customized according to actual needs.
1. Iron plate: considering the weight and cost, the thickness of 0.8mm - 1.0mm can be selected.
2. Acrylic: from the consideration of beauty and cost, can choose 10mm - 15mm thickness.
3. PETG: 1mm - 1.5mm thickness can be selected from the consideration of utility and aesthetics.
1. Powder coating: conventional white and black, other colors can be selected from Pantone color card
or RAL color card.
2. Painting: color can be freely selected, but also can choose gradual color or mixed color.
The iron plate can not be disassembled. Only acrylic headphone holder and PETG billboard can be removed,
which has little impact on packaging cost and transportation cost.
You can order our standard sample or customize a sample.
1. Free 3D sketch.
2. We can customize according to your requirements.
1. Cover: PETG or PET material can be used as the cover of advertising column, with little difference in cost.
2. Advertising decoration screw
1) Each PETG billboard is fixed by 4 stainless steel advertising decorative screws, or 2 (diagonal).
2) Considering aesthetics, 10mm - 15mm is recommended for the diameter of the screw cap.
3. Built-in advertisement
1) Considering the cost, four-color printing paper can be used.
2) Considering durability, four-color printed PVC foam board can be used.
1. Bracket size
1) The conventional length is 65mm, the thickness is 15mm and the height is 205mm.
2) Can be customized according to the actual needs, the overall height of the exhibition frame is 305mm, so the height of the bracket is recommended not to exceed 250mm.
2. Number of brackets
1) There are 2 brackets at the left and right ends of the headphone stand, and there are 4 brackets in total.
2) One or more brackets at each end can be changed as required.
3. Bracket color
1) Transparent and colorless is commonly used.
2) Transparent, translucent or colorless and opaque colors can be selected according to brand characteristics.
4. Bracket grooves
1) The top of the bracket is a groove with a depth of 5mm, which is convenient to stabilize the headphone.
2) The groove depth can be 5mm - 10mm according to the size of the headphone.
1. Advertising support board: considering the height and visual angle of ordinary people, the tilt angle of the support board is suggested to be between 45 degrees and 90 degrees.
2. Advertising methods
1) Paste the plastic cover onto the support board. The plastic cover can insert four-color printing paper or Andy board, which is easy to replace.
2) Paste the paper or Andy board onto the support board and replace it after tearing off.
3) Silk-screen printing on the support board, the logo pattern is simple and cannot be replaced.
4) UV printed on the support board, the logo pattern is bright and three-dimensional, and cannot be replaced.
1. Button shape: round button is adopted by our company, and square or oval shape can be chosen according to usage habit.
2. Button position:
1) Under normal circumstances, the button area is placed in the middle of the headphone holder for the convenience of customers' listening.
2) When the headphone holder is placed in a place with a large number of visitors, it is suggested to configure a button area at both ends to ease the waiting for customers.
3. Number of buttons: the original design contains 8 function buttons (volume increase or decrease, song switch). The left 4 buttons are used for the left earphone, and the right 4 buttons are used for the right earphone. The number and function of buttons can be adjusted according to actual needs.
1. The back panel
1) The headphone display is close to the wall or table wall, and the back plate is not needed to cover the internal structure.
2) The headphone display is not close to the wall or table wall. For the sake of aesthetics, the back plate shall cover the internal structure.
2. Wall accessories: after adding wall accessories behind, the headphone display can not only be displayed on the desktop, but also can be displayed on the wall.
1. The bottom panel
1) If the headphone stand does not use adjusting feet, and the bottom plate does not need to cover the internal structure.
2) If the headphone stand uses adjusting feet, the bottom plate shall be added to install the adjusting feet and cover the internal structure.
2. Outlet holes: the size and location of outlet holes can be customized according to customer needs.
Considering that it is not inconvenient for customers to come to our company for quality inspection before delivery and the cost of employing a third-party inspection company is high, we insist on 100% product inspection exemption and 0% production errors and open a new way of cooperation friendship. We are committed to helping small and medium-sized enterprises with small orders to save costs.
Thickness: 0.01mm-0.15mm (commonly used 0.03mm-0.05mm for display rack packaging plastic bags).
Conventional thickness of 30mm, or according to the need to choose 10mm, 20mm or more than 30mm, the recommended thickness is not more than 50mm.
Number of carton layers: there are 3, 5 and 7 layers in general. It is recommended to use 5 layers for general export products and 7 layers for large and heavy products.
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.