Custom 4 Tier Unique Body Jewelry Eearring Displays
1. General size: W120*D60*H240mm
2. Length, width and height can be customized according to requirements.
1. Iron rod: 3mm diameter, can choose 3mm-5mm diameter.
2. Wood: 22mm thickness, 10mm - 25mm thickness is optional.
1. Iron rod: conventional colors such as white, black, gray are used powder coating. Special colors such as gold,
red, pink and so on use spray paint, spray paint can also do gradual color.
2. Wood: can choose dark wood grain or light wood grain, generally recommended painting, can choose retro style.
1. This product has a small diameter of rod, so it cannot be installed with ordinary screws. If the structure is
replaced by disassembly, it will cost a certain amount of manpower and material resources, thus increasing the cost.
2. The volume of disassembly and packaging is only 5% smaller than that of the whole package, which can be ignored.
1. Free 3D sketch.
2. We can customize according to your requirements.
1. Types of metal rod
1) Iron rod: the surface can be sprayed with powder, galvanized or chrome plated, suitable for low-end accessories. The surface can also be painted, suitable for middle-end or high-end jewelry.
2) Stainless steel rod: 201, 304 or 316 stainless steel can be used. Brushed surface is recommended, which is suitable for high-end jewelry.
2. Number of brackets
1) Standard: 2 rows of brackets, 2 for each row, a total of 4 brackets.
2) Customization: 2, 6 or 8 brackets can be customized as required. In order to maintain the appearance of the display frame, no more than 8 brackets are recommended.
3. Bracket size
Bracket 1: length 50* height 65mm
Bracket 2: length 50* height 115mm
Bracket 3: length 50* height 165mm
Bracket 4: length 50* height 240mm
Note: the size of bracket can be customized according to needs, and the maximum height is recommended not to exceed 300mm.
1. Base size
1) General: length 120* width 60* height 22mm
2) Customization: the base size of 6 supports is 120* wide 87* high 22mm; the base size of 8 supports is 120* wide 114* high 22mm. It can also be customized according to actual needs.
2. Available types of wood
1) Solid wood: pine, oak, birch, camphor wood, etc., with the highest price.The price of pine in solid wood is cheap, often use at displaying frame quite.
2) Splint: medium price.If the edge of the base needs chamfering, the splint is not suitable.
3) Medium fiber board: the price is relatively lowest, can stick wood grain, but wood density is low, not hard enough, light weight, easy to fall.
3. Edge chamfer
1) Edge chamfering width is 6mm, which can be changed to 3mm, 4mm, 5mm or 7mm as desired.
2) Edge chamfering can not only avoid sharp edges, but also improve aesthetics.
3) The original design only has front edge chamfering, which can be chamfered on all four sides as required.
1) Laser engraving logo: logo is recessed, color cannot be selected flexibly.
2) Silk-screen logo: flat logo with dumb color, which can be selected flexibly.
3) UV printing logo: three-dimensional glossy logo, color can also be selected flexibly.
4) Sticker logo: easy to replace with new logo.
In order to spare buyers time to look for matching necklaces, bracelets and earrings, yiyishuang has specially designed jewelry display racks of the same series to enhance the brand image of different brands of jewelry.
The first and third pieces in the picture are good for earrings, the second for necklaces, and the fourth for bracelets or bracelets.
Since 1996, yishang has been focusing on customized display racks, providing 24-hour online service and providing design and quotation within 48 hours.Welcome friends from all over the world to consult!
1. One jewelry display stand has a PE plastic bag.
2. Each jewelry display rack shall have 1 independent carton with carton size: 130*70*250mm. (the independent packaging shall not contain foam)
3. One main carton contains 20 jewelry display racks. (the main carton is surrounded by foam)
1. Plastic bags:
Thickness: 0.01mm-0.15mm (commonly used 0.03mm-0.05mm for display rack packaging plastic bags).
Conventional thickness of 30mm, or according to the need to choose 10mm, 20mm or more than 30mm, the recommended thickness is not more than 50mm.
Number of carton layers: there are 3, 5 and 7 layers in general. It is recommended to use 5 layers for general export products and 7 layers for large and heavy products.
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.